Look 695 Mondrian Frame Small

Frame | Product Code: S3-14477

Out of Stock

**Frame only. No fork, stem or cranks.**

Part of the Look 695 Premium collection, the Look 695 Mondrian is a truly special paint scheme that represents the history of Look and the remarkable impact Look has had in cycling. The Mondrian paint schemes are limited in availability and one of Look's most prized designed.


The Look 695 is a frame offering unequaled cycling precision thanks to the integration of the stem, the headset, the fork and an exceptional performance thanks to its crankset. The 695 goes through the CFD (Continuous Fiber Design) process: where the shape of the tubes are studied so that the carbon fibers work along the best axis, optimizing their mechanical performance. The ZED 2 crankset, the frame’s nerve center, is the culmination of 5 years of research and was tested by athletes and validated at the Beijing Olympics. It brings a new world record to the weight/rigidity and performance of a frame.

For optimal performance, the 695 is equipped with the best crankset presently available on the market: the ZED 2 crankset. To integrate it, the 695 has an oversized bottom bracket (Rolling bearings of 65 mm). The diagonal tube, saddle tube and stays wrap around the casing and extend without a break in the shape thanks to the CFD concept (Continuous Fiber Design) optimising resistance to effort. The new HSC 7 fork, the new Head Fit 3 headset, the C-stem and the E-Post are the other components integrated into the 695 frame. They were specifically developed for that frame, to make the 695 homogenous, rigid, lightweight, stable and easy to handle.

ZedTech 2 Crankset

The ZED 2 carbon crankset that comes with the 695 is a brand new highly innovative design. It is molded in a single piece of carbon (2 pedal cranks + axis + star = FULL SINGLE-PIECE). It reaches a rigidity/weight ratio that was not possible before. The crankset alone (with no roller bearing or chain wheel) but including the two pedal cranks and the axis only weigh 320 grams! Its particular Z shape allows it to be mounted in the frame that has a specific and oversized casing (rolling bearings diameter 65 mm). The technology of the three-lobe insert at the end of pedal cranks allows adjusting the length of the cranks from 170, 172.5 to 175 mm without changing the crankset and while being compatible with all the pedals on the market.

C-Stem Carbon Stem

The C-STEM carbon stem was designed specifically for the 695. It adopts its tube shape called “horizontal” so as to ensure efficient cohesion between the cycling station and the frame. Owing to a new patented tightening system this stem is slightly inclinable (from -9° to +13°). This avoids adding many spacers that lessen the bike’s lateral rigidity and the cycling precision. Finally, its ultra-light carbon body and its titanium screw give the C-STEM great rigidity for a weight of only 160 grams.

Head Fit 3 Headset

New LOOK patented headset dissociating headset adjustment, from stem tightening. The headset’s adjustment is done by tightening the carbon ring on an offset thread placed on the fork’s pivot. It is now possible to change the stem’s height without upsetting the headset’s adjustment. This solution suppresses the compression kit, replaced by a simple cap. Weight gain: 40 grams. Generation 3 of the Headfit is completely integrated into the head tube optimising, even more, the direction accuracy.

The HSC 7 fork is 15% more rigid and 16% lighter than the HSC 6. 100% single-piece carbon, weighing only 295 grs and complying with standard EN 14781(Frontal shock of 144 joules). Moulded carbon tabs, compressed in the continuity of the fork. Tapered pivot using the CFD concept (Continuous Fiber Design) allowing the positioning of the rolling bearing directly on the fork’s head. Oversized ½ inch rolling bearings. The fork pivot contains 2 flat sections and is reinforced to receive the Head fit 3 headset.


  • Size: S/51 
  • Seat Tube (C-T): 660
  • Seat Tube (C-C): 460
  • Top Tube Length: 530
  • Head Tube Length: 140.5
  • Chain Stay Length: 405
  • Seat Tube Angle: 74.5
  • Head Tube Angle: 72.0
  • Stand Over Height: -
  • Wheel Size: 700c


fork Look HSC (295g)
frame HM 110 G/M Ultra Light High Modulus
headset Headfit 3 Integrated Headset 11/8” Top Inox Bearing 1 1/2” Bottom Inox Bearing
weight 2390g
bottom bracket ZED Specific 65mm
crankset Look ZED 2 Crank - Adjustable Length

*All specifications listed are subject to change without notice.


Fork Look HSC (295g)
FRAME HM 110 G/M Ultra Light High Modulus
Headset Headfit 3 Integrated Headset 11/8” Top Inox Bearing 1 1/2” Bottom Inox Bearing
Weight 2390g
Bottom Bracket ZED Specific 65mm
Crankset Look ZED 2 Crank - Adjustable Length
Bike Category Aero Race

Bike Size